The shop will be finally closed at 2022/12/31
Categories Model Kits Zubehoer_fuer_Modelle_im_Massstab_16
Zubehoer_fuer_Modelle_im_Massstab_16
|
Product no.: PA-6-101
Covers for torsion bar suspension on both hull sides. Set includes 16 covers in 1,5mm aluminum. |
$30.00
/ set(s)
*
Delivery weight: 0.3 kg
|
|
|
|
|
Product no.: BP-6-100
Latches for Bergepanther in 1:6 scale. The set includes 4 latches casted in nickel silver. |
$110.00
/ set(s)
*
Delivery weight: 200 g
Not in stock |
|
|
|
New Fan GuardSet of 2 fan guards for Panther in 1:6 scale |
$80.00
/ set(s)
*
Delivery weight: 0.2 kg
|
|
|
|
New FanSet of 2 fans for Panther 1:6 |
$50.00
/ set(s)
*
Delivery weight: 0.2 kg
|
|
|
|
|
Product no.: HL230-1
Modelkit of the engine, which was used in the German tank Panther. The kit includes round about 750 parts (printed parts in ABS, gears, ball bearings, springs, pins, screws and nuts). The parts are mostly bolted together, partially glued with plastic cement. The holes for the screws should be reamed, moreover, I recommend to ream the holes for the pins with a reamer. The delivery time is 6-8 weeks, because all printed parts are produced after order. First come, first serve. Deposit 400, - € at booking confirmation, balance before delivery. |
$1,150.00
/ Kit(s)
*
Delivery weight: 3 kg
|
|
|
|
|
Product no.: HL230-2
Modelkit of the engine, which was used in the German tank Panther. The kit includes round about 450 parts (printed parts in ABS, pins, screws and nuts). The parts are mostly bolted together, partially glued with plastic cement. The holes for the screws should be reamed, moreover, I recommend to ream the holes for the pins with a reamer. The delivery time is 6-8 weeks, because all printed parts are produced after order. First come, first serve. Deposit 350, - € at booking confirmation, balance before delivery. |
$1,040.00
/ set(s)
*
Delivery weight: 3 kg
|
|
|
|
|
Product no.: LE-6-001
Set of track links for a model of the Leopard 1 / Bergepanzer Standard in 1/6 scale. The set contains 200 links in die cast zink. One track link includes 2 track link bodys, 1 tooth, 2 end connectors, 2 track pads, 2 inlays, 2 bolts, 2 screws and nuts. The links themselves have to be drilled with 5.1 mm. The holes are slightly tapered due to production (4.8 to 5 mm diameter).
|
In stock |
|
Product no.: BP-6-106
Handles for detailing the loading floor of Bergepanther in 1:6 scale. 16 handles necessary for the loading floor. For assembly rivet screws M1x12 and nits M1 ar necessary. |
$8.00
*
Delivery weight: 100 g
|
|
|
|
|
Product no.: BP-6-105
6 thumbscrew heads in a set. Can be glued to cap screw heads M3 |
$3.50
/ set(s)
*
Delivery weight: 50 g
1 piece(s) = $0.58
|
|
|
|
|
Product no.: HL230-3
Partial replica of the engine HL230 in 1: 6 scale for installation in models. The kit includes the parts for air filters, the rear part of the crankcase, the rear flange, the rear part of the cylinder heads, a part of the cylinder head cover, the fan gearbox, the magnet ignition, part of the cooling water hoses (without pipe clips) and parts of the exhaust. All parts are printed in 3D using ABS. Delivery time round about 3 weeks. |
$280.00
/ set(s)
*
Delivery weight: 0.8 kg
|
|
|
|
|
Product no.: PA-6-102
Sheet with screw locker plates for Armortek Panther G. Phote etched parts in nickel silver. |
$25.00
/ set(s)
*
Delivery weight: 100 g
Not in stock |
|
|
|